Editorial board

Editor-in-Chief:

CORINA SANDU
Mechanical Engineering Department
Virginia Polytechnic Institute and State University

Associate Editors
F.J. ALONSO SÁNCHEZ - Department of Mechanical Engineering, University of Extremadura, Badajoz, Spain
S. CHO - Department of Naval Architecture and Ocean Engineering, Seoul National University, Seoul, Korea
R. DIMITRI- University of Salento, Lecce, Italy
M. Z. DOSAEV - Institute of Mathematics, Lomonosov Moscow State University, Moscow, Russia
J. FEHR - Institute of Engineering and Computational Mechanics,University of Stuttgart and SimTech, Stuttgart, Germany
M. GHAYESH - The University of Adelaide, Adelaide, South Australia
F. J. GONZÁLEZ VARELA - Laboratorio de Ingeniería Mecánica, University of A Coruña, Ferrol, Spain
J. LOGO - Department of Structural Mechanics, Budapest University of Technology and Economics, Budapest, Hungary
N. KOGISO - Department of Aerospace Engineering, Osaka Metropolitan University
S. NOKELBY - Department of Automotive, Mechanical and Manufacturing Engineering, Faculty of Engineering and Applied Science, Ontario, Canada
M. OHSAKI - Department of Architecture and Architectural Engineering, Kyoto University, Kyoto, Japan
C. SANDU - Mechanical Engineering Department, Virginia Polytechnic Institute and State University, Blacksburg, VA
D. SPINELLO - Department of Mechanical Engineering, University of Ottawa, Ottawa, Canada
D. TAVERNINI- University of Surrey, UK
F. TORNABENE - Department of Innovation Engineering, University of Salento, Salento, Italy
E. TUBALDI - Department of Aerospace & Mechanical Engineering, University of Arizona, AZ
V. VALVANO- University of Derby, UK
C.P. VYASARAYANI - Department of Mechanical and Aerospace Engineering, Indian Institute of Technology Hyderabad, Telangana, India
P. WAHI - Mechanical Engineering DepartmentIndian Institute of Technology-Kanpur, Uttar Pradesh,India
W-.C. XIE -Department of Civil Engineering and Applied Mathematics, Waterloo, Ontario, Canada
J. YANG - School of Engineering, RMIT University, Melbourne, VIC, Australia
A. YERRO-COLOM - Civil & Environmental Engineering, Virginia Tech, Blacksburg,VA
X. ZHUANG - Leibniz University Hannover, Germany
K.K. ZUR - Department of Mechanical Engineering, Bialystok University of Technology, Bialystok, Poland